If you have a car, you must have noticed that the Windshield Fluid Light illuminates at some point in time.
Have you ever wondered why this happens or how to reset windshield fluid light so that the light doesn’t illuminate again?
Well, I have all the answers for you.
I have discussed everything about Windshield Fluid Light and How To Reset Windshield Fluid Light so that you don’t have to worry again about it blinking.
Keep on reading below before trying any methods.
Read More: Coolant vs. Windshield Wiper Fluid
Why Is It Important To Reset Windshield Fluid Light?
When the Windshield Fluid Light in your car starts blinking, it means that there is not enough liquid in the fluid reservoir, and needs to be refilled immediately.
It is important to refill the reservoir and reset the windshield fluid light because:
It ensures safety
When the reservoir is full (up to the approved level), it will clean the windshield effectively regardless of the weather, dirt, and debris on it. It will improve visibility and help you to drive safely.
If there isn’t enough liquid, you might have trouble cleaning the windshield and face difficulties while driving, especially in adverse weather conditions.
A full reservoir also helps to prevent damage
If you keep on driving with windshield washer fluid, it can run dry and cause damage. A blinking signal indicates you need to refill the tank so that you can avoid any type of permanent damage to your car.
How To Reset Windshield Fluid Light?
If your fluid light isn’t working correctly and you need to reset it for good, here are a few ways to reset windshield fluid light effectively.
Method 1: Re-fill The Washer Fluid Tank
One of the easiest and quickest ways to reset windshield fluid light effectively is by filling up the reservoir with enough washer fluid.
As the washer fluid reservoir tank in your car is translucent, you can actually check if there is enough liquid or not. If the liquid level seems low, fill it up immediately.
Fill the tank to the recommended level to avoid any kind of mishaps.
If you don’t have enough washer fluid to fill the tank, pour water in it- water will do the work just fine.
After the washer tank is full, the windshield fluid should turn off on its own.
Method 2: Replace The Washer Fluid Sensor
If the windshield fluid light still doesn’t turn off even after refilling the fluid tank, the sensor of the washer fluid tank is faulty and hence, needs to be replaced immediately.
It doesn’t matter how often you refill the washer tank until you change the fluid sensor; the warning light will not work correctly.
Method 3: Use The Gas Pedal
Even after filling the reservoir tant with the fluid, it doesn’t stop the fluid light from blinking; you need to use the gas pedal method to stop the warning in no time.
To do so effectively, turn the ignition and push your gas pedal downward a few times within a few seconds. It will reset the low washer fluid light and turn off the warning signal immediately.
Method 4: Repair The Washer Fluid Tank
Another prominent reason your car’s fluid light indicator remains blinking even after refilling the fluid tank is because of a faulty or leaky reservoir.
As it cannot hold the liquid for long, it always instigates the warning sign blinking. Repair or replace the tank immediately to not only reset the sign but also to avoid any accidents.
Tips to Reset Windshield Fluid Light
Let me share some expert tips with you so that resetting the windshield fluid light becomes even easier and more effective.
- Go through the owner’s manual to understand how to windshield fluid light signal of your specific car model works. Owner’s Manual often contains valuable information.
- Make sure to use top-quality washer fluid in the reservoir tank to ensure better visibility.
- Even after resetting the washer fluid light, don’t forget to add lubricant to the wipers to ensure free movement. Because of the low liquid level, the wiper might get jammed.
What if I can’t find the reset option?
If you’re unable to find the reset option in the menu, consult your vehicle’s owner’s manual or contact the manufacturer’s customer service for guidance.
Can I reset the light without the manual?
It’s recommended to consult the owner’s manual for accurate instructions tailored to your vehicle. However, some online resources and forums might provide general guidelines based on common practices for resetting warning lights in various vehicle models.
Are there variations between vehicle brands?
Yes, the process for resetting the windshield fluid light can vary significantly between different vehicle brands and models. Always refer to the specific instructions provided in your vehicle’s owner’s manual.
Is resetting the light the same for all warning lights?
No, different warning lights might have different reset procedures. Always follow your owner’s manual instructions for each warning light.
Is this a DIY task, or should I visit a mechanic?
Resetting the windshield fluid light is usually a simple task that can be done by the vehicle owner. However, if you’re unsure or uncomfortable with the process, you can ask a mechanic or a knowledgeable friend to assist you.
Andy’s Opinion
Even though many might think fixing the windshield fluid light isn’t that important, it’s completely a WRONG idea. It’s incredibly crucial to fix this light before driving.
And now that you know how to reset windshield fluid light, I hope that you can do it on your own to ensure a safer driving experience.
