Rain X produces some of the best windshield wipers you can find on the market. While they do tend to last longer than many of their alternatives, at one point, you will have to consider replacing them with a new set of wipers.
How to change Rain X windshield wipers? If you don’t want to seek professional help to get a new set of Rain X wipers installed on your cars, spare a few minutes of your time and give this article a read. I can assure you it would be a worthwhile effort.
Read More: How To Put On Rain X Windshield Wipers?
Why Use Rain X Windshield Wipers?
Rain X wipers don’t come cheap, but they can do a better job of removing water from your windshield than most other wipers. The company’s signature water-repellant technology gives Rain X wipers superior wiping abilities.
One of the main downsides of buying cheap wipers is their rapid deterioration. If you have to replace the wipers frequently, you will spend way more than you intended for wipers. So, paying a bit extra one time for Rain X’s premium offerings makes more sense.
The water-repellent coating you will find in Rain X wipers is not only great for rainwater removal. You will be surprised to see how well it clears the snow that amasses on your windshield on a freezing day. For harsher weather challenges, Rain X wipers are excellent.
How To Change Rain X Windshield Wipers?
How To Remove Old Rain X Wipers?
Step 1:
Get into your car and turn on the wipers. Turn them off when the blades are perpendicular to the windshield. This is the ideal position for wiper removal.
Step 2:
Place a towel over the windshield. If the wiper arm suddenly falls down, it will shatter the windshield. The towel will prevent that from happening.
Step 3:
The Rain X wiper blade is connected to the lower wiper arm with a J-hook. To take it off, press the button beneath the J-hook and slide the blade off. As simple as that!
Read More: Rain X Wiper Blades Won’t Click J Hook
How To Install New Rain X Wiper Blades
Step 1:
Take the new blades out of the packaging. Remove the plastic sheets covering them.
Step 2:
Look for a set of tabs on both sides of the blades. After finding them, press firmly and pop the connector cap.
Step 3:
Pull out the lower arm of the wiper and insert the blade’s connecting port into the J hook. Make sure the hook reaches all the way down to the bottom of the connecting port.
Step 4:
After correctly inserting the J hook inside the connecting port, close the connector cap. You can simply flip it down. Hearing a clicking sound means the blade has gotten locked in place. If you don’t hear the click, it means you have to push the hook further down the connecting port.
Read More: Rain X vs. Michelin Wiper Blades
How To Care For Your Rain X Wipers?
Silicone Treat Them 3/4 Times A Year
Apply silicone spray to the wiper blades every few months. It will help in retaining the gliding ability of the wiper blade material. Do this three or four times a year at minimum. This should ideally be done after wiping down the windshield wipers.
Don’t Forget To Defrost
Heavy snow can cause windshield wipers to become stuck. They might break if you switch them on before defrosting the windshield glass. . If you have to clear snow or ice from your windshield in subzero weather, turn on the defroster before you do anything else.
If you have to go out on early morning drives, it’s best to warm up the car in advance by switching on the defroster in high mode.
Take Care Of The Windshield
A clean windshield makes for long-lasting and well-functioning wipers. So, cleaning the windshield and back glass is integral to maintaining the wipers. Heavy dirt causes the wiper blades to discolor and wear out more quickly.
Using a glass cleaner on the windshield and back window once a week, regardless of the weather, will help preserve the wiper blades. Do not engage the wipers when cleaning the windshield. It will make the wipers more dirty and damaged.
Don’t Run Wipers On Dry Windshields
Only use the wipers when the windshield is wet. Wiper blades may wear out more quickly if used on a dry surface, which will only bring you more trouble. So, never activate the wipers when the windshield is as dry as the Sahara Desert.
Final Opinion
Knowing how to change your Rain X windshield wipers will save you money in installation and service charges from a mechanic or repair shop. The extra money you save can then be used to purchase the most premium wipers Rain-X offers.
These wipers are designed with advanced weather protection technology, allowing them to withstand any climate condition they may be exposed to.
The added cost of these wipers is more than worth it due to their superior construction, strength, and longevity. Rain X wipers will protect your windshield, increase visibility and keep you safe in any weather.
